Cargo Security · Insights

Reefer Temperature Monitoring: Setting Alert Thresholds That Actually Matter

How to set reefer temperature monitoring alerts that catch real cold-chain risk without drowning dispatchers in noise.

By the Sentrick Cargo team · Published November 2, 2026

Why thresholds are the hard part

Installing sensors in a refrigerated trailer is the easy part. Deciding when to alert is where most programs succeed or fail. Alert too often and dispatchers ignore the system; alert too late and the load is already compromised. Good reefer temperature monitoring starts with thresholds designed around the product and the journey.

Know the product requirements first

Different goods have different tolerances. Fresh produce, frozen foods, dairy, and pharmaceuticals can all have distinct temperature ranges, and some have limits on how long they may spend outside them. Begin with the shipper's specification or applicable regulatory guidance, not a generic default. Write the allowed range and the allowed excursion time down for each commodity.

Use two levels, not one

A single threshold creates a cliff. A two-level approach is more practical:

This separates "pay attention" from "act now" and reduces alert fatigue.

Add a time dimension

A short spike when a door opens at a dock is not the same as a sustained rise in the cargo area. Alerting on duration as well as value helps filter normal events. For example, a reading outside range for several minutes may deserve a note, while a longer excursion triggers escalation. Choose durations based on how quickly the product actually warms, which depends on load, ambient temperature, and packaging.

Look at the right sensor position

Air temperature at the return vent, the supply vent, and the middle of the load can differ. Probes near the door tend to warm first. Where possible, use more than one measurement point and understand which one best represents product temperature. Pre-cooling the trailer before loading and documenting the starting temperature also prevents disputes later.

Watch the equipment, not only the temperature

Early signs of trouble often show up in the refrigeration unit itself: setpoint changes, defrost cycles running too long, alarms from the unit, low fuel, or power loss. Combining unit status with temperature readings can give earlier and clearer warnings than temperature alone.

Plan the response before the alert

An alert is only useful if someone knows what to do. Define who receives it, what they check first, how quickly they should respond, and when to contact the driver, the carrier, or the shipper. Include a path for nights and weekends. Review each excursion afterward to see whether the thresholds helped.

Keep records that stand up

Time-stamped logs of temperature, door events, and unit status support claims, audits, and customer reporting. Make sure data is retained for the period your customers and regulations require, and that device calibration is checked on a regular schedule.

Tune over time

Review alerts monthly. If a particular lane or driver generates repeated warnings that never lead to action, the threshold or duration may be wrong, or there may be a genuine operational issue worth fixing. Thresholds should evolve with real data.

Where Cargo fits

Sentrick Cargo is designed for shipment and container monitoring, bringing together location, condition, and security events. Sentrick applications are in app store review and launching soon.