Security · Insights

Pallet-Level vs. Trailer-Level Tracking: Choosing the Right Granularity for High-Value Freight

Tracking the truck tells you where the freight probably is. Tracking the pallet tells you where it actually is. Which one you need depends on what you ship and where the risk sits.

By the Sentrick Cargo team · Published November 6, 2026

When a shipper decides to add tracking, the first question is usually which device to buy. The better first question is what, exactly, you want to be able to locate. A tracker bolted to a trailer, a device inside a container, and a small tag on a single pallet are three different levels of granularity, and each answers a different question.

Trailer and container level: the asset view

A device on the trailer or container reports where that asset is, whether its doors have opened, and whether it has moved when it should not have. This is the most common starting point because it is simple: one device per asset, longer battery life from larger batteries or external power, and reliable coverage when mounted well. It is a strong fit for full-truckload moves, drop-and-hook operations, and any lane where the main risk is the whole trailer being taken. Our guide to container tracking devices covers the hardware side.

The limitation is what the device cannot see. If a trailer carries freight for several customers, or if thieves remove part of the load at a stop, the trailer keeps reporting a normal location while the loss happens inside. The asset view tells you the vehicle is fine; it does not tell you the contents are.

Pallet and carton level: the goods view

Smaller tags attached to pallets, cartons, or individual high-value items report on the goods themselves. This matters when the freight is portable, valuable, and easy to resell: electronics, pharmaceuticals, tools, and similar categories. It also matters in less-than-truckload networks, where freight changes trailers at terminals and no single trailer device follows it from origin to destination. See our notes on LTL terminal risks.

The trade-offs are practical. Tags are smaller, so battery and reporting frequency are more constrained. They cost per unit, so you cannot tag everything. Signal can be weaker when tags are buried inside stacked, wrapped freight. And someone must attach, register, and recover them, which adds handling steps at the dock.

Questions that point to the right level

A layered approach often works best

Most shippers do not have to choose one level for everything. A common pattern is to put a durable, well-placed device on the asset for continuous location and door or tamper alerts, and to add goods-level tags only to the shipments that justify them: high-value loads, new lanes, or routes with a history of problems. The asset device provides the backbone; the tags answer the harder question of whether the goods are still where they should be. Where to mount the asset device matters too, covered in our article on device placement.

Keep the alerts usable

More devices mean more data, and more data means more noise unless it is organized. The point of granularity is better decisions, not more pings. Combining location, movement, door, and tamper events into a single risk view helps dispatchers see what deserves action. Our piece on alert rules dispatchers can act on shows how to keep that manageable.

How Sentrick Cargo fits

Sentrick Cargo is designed to combine signals from tracking devices with behavioral analysis, so a shipment is judged on what is happening, not only where it is. Whether the signal comes from a trailer device or a smaller tag, the goal is the same: surface the shipments that need attention before a loss becomes unrecoverable.

The takeaway

Start with where your freight is actually at risk, then choose the lowest-cost level of tracking that closes that gap. Track the asset for continuity, track the goods where the value and handling risk justify it, and make sure the alerts that result are ones a person can act on.